Can SpaPilot Be Installed Outside the Spa?

Yes. SpaPilot can be installed outside the spa cabinet if needed.

However, the device is not designed to be exposed directly to weather and should always be installed in a protected location.

Weather Protection

SpaPilot does not have an official IP rating.

This means the device is not waterproof or weatherproof and must not be exposed directly to:

• rain

• snow

• standing water

• direct water spray

• heavy condensation

If installed outside the spa cabinet, the device should always be placed inside a dry and protected enclosure.

Suitable locations include:

• inside the spa cabinet

• inside an electrical compartment

• inside a weather-protected equipment box

Operating Temperature

SpaPilot is designed to operate in the typical environmental conditions found around outdoor spas.

However, as with most electronic devices, it should be protected from:

• extreme heat

• extreme cold

• direct sunlight

• moisture accumulation

If the device is installed outdoors, we strongly recommend placing it in a ventilated enclosure to protect it from environmental exposure.

Best Practice Installation

For the most reliable operation we recommend installing SpaPilot:

• inside the spa cabinet, or

• inside a dry and ventilated protective box near the spa equipment.

This protects the device from weather exposure and helps ensure stable operation over time.

Summary

• SpaPilot can be installed outside the spa cabinet.

• The device does not have an IP rating.

• It must be installed in a dry, protected location and not exposed directly to weather.

Using a protective enclosure is recommended for outdoor installations.